RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0049520 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/ Entry and Start System)

a.

Check the operation of the opener switch.

i.
D105844
2.5,1.031 2.604,0.563 false 2.927,1.052 2.729,0.552 false 0.167,1.208 0.479,1.365 0.313,0.156 10 *1 0.938,1.083 1.25,1.24 0.313,0.156 10 *2 0.125,0.073 0.438,0.229 0.313,0.156 10 *a 2.417,1.063 2.729,1.26 0.313,0.198 10 UL 2.906,1.073 3.063,1.271 0.156,0.198 10 E
*1
*2
*a
UL
E
*1 Free
*2 Pushed
*a Component without harness connected
(Back Door Opener Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (E) - 3 (UL) Back door opener switch not pushed (OFF) 10 kΩ or higher
2 (E) - 3 (UL) Back door opener switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.



b.
D105845
2.646,1.229 2.688,0.594 false 3.031,1.229 2.813,0.604 false 0.792,1.49 1.104,1.646 0.313,0.156 10 *1 1.26,1.521 1.573,1.677 0.313,0.156 10 *2 0.083,0.073 0.396,0.229 0.313,0.156 10 *a 3.031,1.26 3.344,1.458 0.313,0.198 10 L 2.604,1.281 2.76,1.479 0.156,0.198 10 E
*1
*2
*a
L
E
*1 Free
*2 Pushed
*a Component without harness connected
(Back Door Opener Switch Assembly)


Check the operation of the lock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (L) - 2 (E) Back door lock switch not pushed (OFF) 10 kΩ or higher
1 (L) - 2 (E) Back door lock switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.



Hide 84840G 2.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/o Entry and Start System)

a.

Check the operation of the opener switch.

i.
D105843
2.76,1 2.708,0.573 false 2.406,1.021 2.604,0.552 false 0.177,1.219 0.49,1.375 0.313,0.156 10 *1 0.979,1.115 1.292,1.271 0.313,0.156 10 *2 0.073,0.083 0.385,0.24 0.313,0.156 10 *a 2.26,1.021 2.573,1.219 0.313,0.198 10 UL 2.708,1.021 2.865,1.219 0.156,0.198 10 E
*1
*2
*a
UL
E
*1 Free
*2 Pushed
*a Component without harness connected
(Back Door Opener Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (E) - 3 (UL) Back door opener switch not pushed (OFF) 10 kΩ or higher
2 (E) - 3 (UL) Back door opener switch pushed (ON) Below 1 Ω


If the result is not as specified, replace the back door opener switch assembly.